Name: 18,000-lumen 2K B Laser Projector
Brand: NEC
SKU: NC1803ML

Model: NC1803ML

Sharp for Education

Sharp and Digital Cinema

Designed for theaters with screens (up to 62.3 ft. wide), NEC's NC1803ML is the latest DCI compliant RB Laser DLP cinema projector. Delivering precise 2K (2048 x 1080) resolution, 3-D capabilities and high contrast images (2000:1), this model is easy to operate, extremely user-friendly and requires minimal maintenance providing up to 50,000* hours of laser life for unsurpassed TCO.

3D content utilizes the projector's full 2K resolution and triple flash technology for smooth motion
Lamp free projector uses an B laser module
Approximately 50,000* hours of expected usage of the laser and DMD (depends on environmental conditions)
Direct selection buttons for eight stored projector configurations
Auto brightness control maintains constant brightness by adjusting the laser power as it ages
Complete line of (6) bayonet-style lenses with electronic zoom, focus and lens shift
Memory functions for lens position and light output simplify frequent operation

Legal Disclaimer To California Residents
WARNING: This product can expose you to chemicals including Styrene and Formaldehyde (gas), which are known to the State of California to cause cancer, and Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov

Product Specifications

Display

Screen Resolution	2K 2048x1080	Maximum Resolution	2K 2048 x 1080
Lifetime	2 years / 50,000 hours

Synchronization Range

Horizontal (Analog/Digital)	15-100kHz (RGB: 24kHz or over)	Vertical	50-120Hz

Power Consumption (typical)

On	10,195 BTU	Power Savings Mode	2988W
Input Current	18.1A	Power Requirements	100 – 240V AC, 50/60Hz Single Phase for Projector head 220 - 240V AC, 50/60Hz Single Phase for Light source
Power Supply Voltage	200 - 240V AC, 50/60Hz Single Phase

Physical Specifications

Dimensions (WxHxD) Product: 27.4 x 43.1 x 20.1 in. (697 x 1095 x 510mm) External: 27.4 x 52.6 x 20.0 in. (697 x 1337 x 510mm) Shipping: 36.5 x 62.6 x 35.0 in. (926 x 1590 x 888 mm)		Weight Net Weight: 310.9 lbs. / 141 kg (excluding lens) Shipping: 580 lbs. (263 kg)

Environmental Conditions

Operating Temperature	50-96°F / 10-35°C	Operating Humidity	10 to 85% Humidity (Non-Condensing)
Operating Altitude	0 to 3000 m (9,800 ft)	Storage Temperature	14-122°F / -10 50°C
Storage Humidity	10% - 85% (non-condensing)	Storage Altitude	0-12,000m / 0-39,370ft (above sea level)

Limited Warranty (parts & labor)

Registered owners receive a 2-year parts and labor warranty

Additional Features

Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens

Optical

Lens Shift	+/-23% Vertical, +/-7% Horizontal	Light Output(Lumens)	18,000 Lumens
Light Source Life	50,000 hours	Throw Ratio	1.13 to 1.66:1 zoom / 1.30 to 1.85:1 / 1.45 to 2.17:1 zoom / 1.63 to 2.71:1 zoom / 1.95 to 3.26:1 zoom / 2.71 to 3.89:1 zoom
Projection Distance	2.9 - 35.9 ft. / 0.9 - 10.9 m	Projector Angle	+/- 15° (Up / Down)
Lens Zoom: Motorized Focus: Motorized F number, fnumber: (NC-60LS12Z) F=2.5, f=26.7-40.5mm, (NC-60LS14Z) F=2.5, f=31.2-45.6mm, (NC-60LS16Z) F=2.5, f=35.4-56.3mm, (NC-60LS19Z) F=2.5, f=41.6-71.1mm, (NC-60LS24Z) F=2.5, f=52.4-85.3mm, (NC-60LS39Z) F=2.5, f=84.9-142.0mm

Mechanical

Installation Orientation	Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear	Fan Noise	50dB
Regulations	US: UL60950-1 (2nd)/ FCC Part15 Class A (Marking: UL) / 'CAN/CSA C22.2, ICES-003 Issue6 ClassA / Latin America: EN60950-1/EN55022 Class A,EN55024, EN61000-3-2/-3-3/-3-11/-3-12 (Marking CE) / Laser Safety US: IEC60825-1 Ed.3:2014 Class 1, IEC62471:2006 Risk Group 3 / Laser Safety Others: IEC60825-1 2014 : Class1, IEC62471-5 2015 : RG7	Optional Lenses	Zoom lens 1.20-1.80 (NC-60LS12Z), Zoom lens 1.40-2.05 (NC-60LS14Z), Zoom lens 1.59-2.53 (NC-60LS16Z), Zoom lens 1.90-3.25 (NC-60LS19Z), Zoom lens 2.40-3.90 (NC-60LS24Z), Zoom lens 3.90-6.50 (NC-60LS39Z)

Accessories

Included	User Manual Important Information Service Door Key for Projector Laser Administrator Key	Optional	Zoom lens 1.20-1.80 (NC-60LS12Z) Zoom lens 1.40-2.05 (NC-60LS14Z) Zoom lens 1.59-2.53 (NC-60LS16Z) Zoom lens 1.90-3.25 (NC-60LS19Z) Zoom lens 2.40-3.90 (NC-60LS24Z) Zoom lens 3.90-6.50 (NC-60LS39Z)

Projection Method

3-chip DMD reflection method (DLP Light Engine)

Primary Lenses

Zoom lens 1.20-1.80 (NC-60LS12Z), Zoom lens 1.40-2.05 (NC-60LS14Z), Zoom lens 1.59-2.53 (NC-60LS16Z), Zoom lens 1.90-3.25 (NC-60LS19Z), Zoom lens 2.40-3.90 (NC-60LS24Z), Zoom lens 3.90-6.50 (NC-60LS39Z)

Lens Adjustment Functions

Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens

Light Source

B Laser Light Source

Supported Screen Size (maximum)

Up to 62.3 ft. / 21m

Cooling Method

Liquid cooling inside, air cooling with dust-preventing electrostatic filter

DMD Specifications

0.98” DMD chip, DC mini 2K

Notes

* Subject to installation conditions. Maximum screen size is under the conditions of 14-ft-L @ screen gain 1.8 *** When the AC power to the projector power supply and the lamp power supply are provided by a single cable

Technologies

6 Bayonet-Style Lenses

Allows for quick and easy lens exchange. Optional lenses enable the user to determine the appropriate lens to cover projection distances between 2.6 and 179.8 feet.