Model: UN552-TMX9P
$44,219.00 USD
NEC's complete 55" 3x3 LCD TileMatrix™ Digital Video Wall Solution delivers an all-in-one, easy-to-configure and cost-effective solution that is ideal for dynamic digital signage, information display and command & control applications. Exclusive TileMatrix, TileComp™ and FrameComp technologies, combined with the new glass-to-edge design of the NEC UN551S and the full adjustment capabilities of the Peerless DS-VW775 mounting system, provide for a near seamless video wall without the need for additional third-party equipment. NEC provides everything besides the source to complete your video wall solution!
  • Bundled solution with everything required for a 3x3 video wall makes configuration and installation easy
  • Pull-out mount allows for full-service capabilities and 6-axis adjustment for perfect alignment
  • S-IPS panel technology allows for excellent off-angle viewing and less color shift compared to other technologies
  • Auto ID feature reduces install time in the single press of a button
  • Expanded daisy chain options with UHD passthrough via DisplayPort enables UHD resolution across the entire wall
  • Display wall calibration kit, Overframe Bezel Kit and IR/Human sensor complete the solution
  • Overnight onsite exchange warranty ensures minimum downtime for maximum impact
  • Input Switching Speed minimizes downtime between source transitions
  • Human Sensor Accessory ensures digital signage is directed at a targeted audience
  • Near field communication capabilities for setup and service
  • Video daisy chain limitations apply when High-bandwidth Digital Content Protection (HDCP) is utilized



Legal Disclaimer To California Residents
WARNING: This product can expose you to chemicals including Styrene and Formaldehyde (gas), which are known to the State of California to cause cancer, and Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov


Display

Panel Technology S-IPS Viewable Image Size 55 "
Aspect Ratio 16:9 Screen Resolution 1920x1080
Pixel Pitch 0.5 mm Pixels Per Inch 45 @ native resolution
Backlight Type LED Direct-lit Brightness (maximum) 700 cd/m2
Contrast Ratio (typical) 1200:1 (without local dimming) Viewing Angle (typical) 178° Vert., 178° Hor. (89U/89D/89L/89R) @ CR>10
Response Time (Gray to Gray) 8 ms Refresh Rate 60Hz
Active Screen Area 47.62 x 26.79 in. / 1209.6 x 680.4mm Orientation Landscape/Portrait
Displayable Colors More than 1.07 billion  

Synchronization Range

Horizontal (Analog/Digital) Analog: 15.625/15.734/~31.5-~91.1 kHz, Digital: ~25.0 - ~91.1-~134.0KHz  

Input Signal

Video Analog RGB 0.7 Vp-p/75 Ohms , Digital TMDS / DisplayPort Sync Separate sync: TTL Level (Positive/Negative)
Composite sync: TTL Level (Positive/Negative)
Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)

Calibration

Factory Calibration Yes Sensor Calibration (through USB) Yes, External
Calibration with Software NEC Display Wall Calibrator (KT-LFD-CC2) Calibration Software NEC Display Wall Calibrator (KT-LFD-CC2)

Signal Compatibility/Connectivity

PC Signal Compatibility Yes Macintosh Signal Compatibility Yes
Video Analog RGB 0.7 Vp-p/75 Ohms , Digital TMDS / DisplayPort Sync Separate sync: TTL Level (Positive/Negative)
Composite sync: TTL Level (Positive/Negative)
Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)
Input Terminals
Analog:
VGA 15-pin D-sub
Digital:
DisplayPort 1.1/1.2 x2, HDMI 1.4/2.0 x2, DVI-D
Audio:
Audio Mini-Jack x2, DisplayPort Audio, HDMI Audio
External Control:
RS-232C, LAN (100Mb), 3.5mm Mini-Jack (IR Remote)
Data:
microSD (Media Player), USB 2.0 (Media Player, USB (Service), USB Type-B (Upstream), USB x 2 (Both for Compute Module, 1 x 5V/2A Powered)
Output Terminals
Digital:
DisplayPort (Output DisplayPort1 and OPTION (DP)), HDMI (Outputs HDMI1, DVI and OPTION (TMDS))
Audio:
3.5mm Mini-Jack, External Speaker Jack (2)
External Control:
LAN (100Mb)

Power Consumption (typical)

On 150W ECO Mode Standby <0.5W
Power Consumption (max) 225W (Brightness Max), 380W (All Functions Maxed) Input Current 4.2A @ 100V, 1.7A @ 240V

Physical Specifications

Bezel Width (Left/Right, Top/Bottom) 0.09 in./0.05 in., 0.09 in./0.05 in. : 2.3 mm/1.2 mm, 2.3 mm/1.2 mm Dimensions (WxHxD)
Without stand:
47.8 x 27 x 4.1 in. / 1213.4 x 684.2 x 103.8 mm
Shipping:
56.5 x 34.4 x 12.5 in. / 1436.0 x 873.0 x 317.0mm
Weight
Net Weight (without stand):
61.9 lbs. / 28.1 kg.
Shipping:
83.8lbs. / 38.0kg
VESA Hole Configuration 400 x 400mm (4-hole, M6)

Environmental Conditions

Operating Temperature 41-104°F / 5-40°C Operating Humidity 20-80%
Operating Altitude 9843 ft. / 3000m Storage Temperature -4-140°F / -20-60°C
Storage Humidity 10-90% Storage Altitude 40,000 ft. / 12,192m

Limited Warranty (parts & labor)

3 years  

Additional Features

  • Advanced thermal capabilities
  • Ethernet Control and Communication
  • RS-232 Control and Communication
  • Landscape/portrait capable
  • Carbon footprint meter
  • SpectraView Engine Capabilities
  • Scheduler (w/ Real-Time Clock and Holiday mode)
  • Self Calibration to external color sensor
  • White Copy Function
  • Screen saver function
  • 4K UHD Daisy Chain capabilities
  • Optional human sensor
  • Intelligent Wireless Data (Near Field Communications)
  • Raspberry Pi Compute Module Slot
  • Expanded daisy chain (DP 1.2/HDMI 2.0)
  • 6-axis color adjustment
  • Metal rear cabinet
  • Handles
  • Variable picture modes
  • Advanced video settings (Noise Reduction, Adaptive Contrast)
  • Input labeling
  • Backlight adjust
  • Frame Comp Capabilities
  • Internal Media Player via microSD or USB
  • HDR Emulation
  • Aspect ratio control
  • LED direct-lit backlighting
  • OPS/Expansion slot
 

Accessories

Included
  • 3.0m Power cord
  • 2.0m DisplayPort cable
  • 2.0m HDMI cable
  • LAN cable
  • SD Card Cover
  • Clamp for Power Cable
Optional
  • Display Wall Calibrator Kit (KT-LFD-CC2)
  • Human/IR Sensor Accessory (KT-RC3)
  • Table Top Stand (ST-322)
  • Overframe Bezel Kit (KT-55UN-OF5)

Programmable Gamma
3 Look-Up-Table (LUT) banks allows the new P series to save multiple calibration settings. This improves display flexibility as displays do not have to be recalibrated each time requirements changes. Also useful for rental and staging
3D LUT
Internal 14-bit programmable 3D lookup tables (LUTs) allow the display of 1.07 billion colors out of a palette of 4.3 trillion (with 10-bit DisplayPort input) for accurate color, smooth images and hardware calibration.
Auto Tile Matrix
A set up feature that will save a tremendous amount of time and cost at set up. Auto tile matrix does and auto set up of video wall via DP and LAN daisy chain. Just run auto ID on the first display, choose the number of horizontal and vertical displays, press “SET”
Carbon Footprint Meter
Informs and motivates responsible use of the display by calculating and tracking the conservation of green gas emissions in real time.
Round-The-Clock Scheduler
Allows for advanced scheduling of monitor powering up/down, increasing panel lifetime, reducing power consumption and saving the time and expense of finding and purchasing a third-party scheduling solution.
Advanced Cooling System
Prevents the likeliness of image retention and improves color uniformity.
Landscape/Portrait Capable
Allows for distortion-free display of content in various orientations, creating new application opportunities.
LED Backlight
Provides for industry-leading low power consumption and less hazardous materials.
TileComp™
Automatically eliminates geometrical distortions between displays by adjusting for the width of the monitor bezels, working in tandem with TileMatrix on NEC displays (some data on the screen will be lost in the area of the bezels).
Ultra Narrow Bezel
The ultra-narrow bezel allows for a screen-to-screen distance between two neighboring displays of only <1.0mm
Built-In Expansion Slot
Allows for seamless integration of current and future NEC accessories and third-party components.
Open Pluggable Specification (OPS)
The first industry-wide standardization in option slots that allows for easier installation, use and maintenance of digital signage
TileMatrix™
Allows users to customize a video wall configuration using advanced On Screen Display controls.
Human Sensor (Large Format Displays)
Upon sending movement, allows for automatic adjustment to certain settings and features in the display which can lead to targeted messaging for dual-purpose display in digital signage or presentation applications.

Large Screen Display Wall Mounts/Stands

Tilt Wall Mount

OPS

Discontinued
Internal HD-SDI Input Card
Discontinued
Internal 3G/HD/SD-SDI input card

Large Screen Display Misc

Overframe Bezel Kit
Human Sensor Accessory

  • 3.0m Power cord
  • 2.0m DisplayPort cable
  • 2.0m HDMI cable
  • LAN cable
  • SD Card Cover
  • Clamp for Power Cable
  • Setup Manual
  • Contents Sheet
Contact Sales Contact Support